喷油泵可靠性（磨合）试验台 - 无锡托福莱尔精密机械有限公司

地　址:无锡市江海西路金山北工业园
　　　西五支路20-2号
邮　编:214121
联系人:方云佳
电　话:0510-85073619
传　真:0510-85073853
手　机:(0)13961832706
邮　箱:info@wxtfle.com
　　　fangyunjia8@163.com

产品展示

产品展示 > 喷油泵可靠性（磨合）试验台

YBKS系列喷油泵（磨合）试验台
YBKS series oil injection pump (running-in) test bench

1.进口控制元器件，可靠性好
Imported control component and device, with good reliability
2.功能全，可按恒速、变速、档位、变负荷等多种状态运行，适应多种喷油泵实验的需要
Complete functions, run under multiple conditions, i.e. constant speed, change speed, gear, varying load, suiting for multiple demand of oil injection test;
3.时间、转速、油温及运转状态液晶屏显示
Display time, rotary speed, oil temperature and running condition in LCD;
4.紧急停机保护，安全性好
Protecting by emergent shutdown, good safety performance;
5.油温压缩机强制制冷 Forced cooling of oil temperature compressor
　

PMS系列油泵磨合（可靠性）试验台
PMS series oil pump running-in (reliability) test bench

主要特点 Main features
1.变频调速无级控制，转速控制精度高，噪音低。
Speed-regulating by frequency conversion and stepless control, high control precision of rotary speed, low noise;
2.钢化玻璃防护罩，隔音效果好，改善工人劳动环境。
Shielding cover is made of tempered glass, with good soundproof result, improving the working environment;
3.转速、温度、油压、气压、运转时间液晶显示。
Displaying rotary speed, temperature, oil pressure, air pressure and rotary time by LCD;
4.八档转速设定。12/24V直流电源。
8-gear rotary speed setting, 12/24V DC power supply;
5.油温自动控制(水冷、压缩机制冷)。双头输出，提高工作效率。
Automatic control of oil temperature (water cooling, compressor cooling), output of dual-head, improving working efficiency;
6.油箱液位、滤油器堵塞、转速等参数异常保护停机。
Shutdown immediately if oil level of oil tank or rotary speed is abnormal or oil filter is blocked;
7.步进电机变负荷机构，精度高，可靠性好。
Stepper motor is of varying load mechanism, high precision and reliability.
主要技术参数 Main technical parameter

主电机功率 Power of main motor	7.5kw/11kw/15kw/18.5kw(单、双头) (single or dual heads)
运转方式 Running mode	恒速、档位、变速，任意选择 constant speed, gear, varying speed for optional
变负荷周期 Cycle of varying	5-120秒任意设定 load can be set each 5-120 seconds
可试缸数 Lubrication oil	2×8	润滑油(冲洗)供油量 for available cylinders	10L/min
输出转速范围 Range of output rotary speed	0-3000r/m	试验油供油量 Supply volume of test oil	2×14L/min
试验油压力 Pressure of test oil	0-4Mpa	试验油油箱体积 with volume of test oil tank	70L
润滑油(冲洗)压力 Pressure of lubrication oil	0-2Mpa	润滑油(冲洗)油箱体积 with volume of lubrication oil tank	60L
主轴中心高 Centre of main shaft	125mm	气压调节范围 air pressure regulation	0-0.2Mpa